Product Name: Electric Cylinder Actuator
Model Type: DTIA
Stroke: As Customer’s Request
DTIA Type Electric Cylinder Actuator Specification
The DTIA type electric cylinder actuator is a reciprocating actuator driven by an electric motor. It is suitable for all linear motions that require reciprocating and pushing. It can swing and rotate through other connected links. It has overload protection and is widely used in metallurgy, power, coal, port, chemical and other industries with the good advantages of light weight, large pulling force, low noise, low energy consumption, convenient installation and maintenance.
Our company manufactured the DTIA type electric cylinder actuator. Pushing trust is from 300kgs to 4000kgs (3000N-40000N), push and pull stroke speed is 40mm/s and 50mm/s. Stroke range is from 100mm to 1000mm.
DTIA type electric cylinder actuator
Steel pallet, wooden cases, etc
Within 10-15 days after receiving order deposit payment
EXW, FOB, CIF, DDP, etc.
T/T, L/C, West Union
|It can be widely used in metallurgy, building materials, chemical industry, lifting the transport and port handling machinery, the valve gate, reversing, tilting, swing and other mechanical drive control amount|
DTIA Type Electric Cylinder Actuator Technical Parameters
Note: “A+S” is electric cylinder actuator stroke(mm)
Model and power of electric motor listed in the above sheet, refers to the power when pusher in the maximum rated output power and maximum rated speed.
The electric motor power is proportional to the pusher thrust and speed. Straight type, Self locking system is required.
1.The operating temperature: -10℃-+60℃
2. Relative Humidity: ≤85%
3. Short-term: ≤25%
4. Start-ups 4-5 times/Minute
Fine and safe packaging used for your products to assure no any damages during transportation.
1. Standard export packaging:
Steel Pallet or Wooden Case;
2. Customized packaging as your request (Logo or other contents accepted to be printed on the packaging);
3. Other special packaging will be designed as customer’s request;
4. By International Express: DHL/UPS/FEDEX/EMS and our own express line;
5. By air or By sea.
Q1: Are you trading company or manufacturer?
A1: We are factory.
Q2: How is the delivery time of DTIA electric linear actuator?
A2: Usually 10-15 days for new production, it is also according to total quantity.
Q3: Do you provide samples? Is it free or extra?
A3: Yes, we could offer the sample but do not pay the cost of freight.
Q4: May I customize the products stroke and pushing power?
A4: Of course you can. We will not begin manufacturing until we get full information about your requirement.
Q5: What are your trade terms?
A5: EXW, FOB, CFR, CIF will be accepted.
Highv is professional at independent development and design. Our professional engineers team focus on power&industry with 30 years experience. We are able to design, develop, produce and deliver your order according to your detailed drawings, samples or just an idea.