1060 Aluminum Strip For Transformer Winding

You are here:

Home
1060 Aluminum Strip For Transformer…

Product Name: 1060 Aluminum Strip for Transformer Winding

Model: 1060-O

Temper: Soft

1060 Aluminum Strip For Transformer Winding Specification

Technical Specifications (Aluminum Strip For Transformer Winding)
Product Range	Aluminum Strip Foil 1060 O Thickness 0.10 – 3.00 mm Width 10 – 1500 mm t<0.10mm and t>3.00mm on special request
Thickness Core Tube	= minimun 15 mm = maximun 20 mm
Edge Deburring Range	Thickness ≤0.20 mm; Burr≤0.03mm Thickness >0.20mm; Burr≤0.05mm
Staggered floor	Thickness ≤0.20 mm; Staggered floor≤0.5mm Thickness >0.20mm; Staggered floor≤2mm
Turriform	Thickness ≤0.20 mm; Turriform≤4mm Thickness >0.20mm; Turriform≤5mm
Protection	Possibility for paper-interleaving and paper core Thickness 0.20 – 2.50 mm Width 50– 1600 mm
Paper core Internal Diameter	Ø 150mm, Ø300mm, Ø400mm, Ø500mm paper core, special internal diameter core and without paper core on special request
Surface Finish	The 1060 Aluminum Strip for Transformer Winding has a smooth surface, free from scratches and impurities
Electrical Conductivity	Transformer windings made of 1060 O in annealed condition is guaranteed to be better than 61.5 % ACS

1060 Aluminum Strip for Transformer Winding

Advantages:
A: Super Thin, No Burrs
B: Round Edge
C: High Conductivity
D: High Purity
E: Totally Annealed
F: Good Reputation
G. High Strangth

1060 Aluminum Strip for Transformer Winding Application

Excellent formability, weldability and corrosion resistance. 1060 aluminum strip are mainly used for electric material in high and low pressure winding for dry type transformer and oil transformer.

Quality Control

We pay more attention to quality support, supply scope, inspection, testing standard, shipment packing, after-sales service.
We have passed ISO9001 quality management system certification.

Quality Control Process:
1) Checking the raw material of aluminum after they reach our factory- Incoming quality control
2) Checking the details before the production line operated
3) Have full inspection and routing inspection during slitting production-In process quality control
4) Checking the aluminum strip after they are produced- Final quality control
5) Checking the aluminum strip before shipment

At the same time, we will help take photos and shoot videos of aluminum strips for you if you need. Every product will be fully and carefully tested before packing and shipping.

More Information

Appearance Standard

Soft surface, no grease, smooth and without feeling scratch.
Tolerances of side burr, thickness and width should less than that in the standard.

Product Package

Standard export wooden pallet or wooden case. Also we can meet special requirements from our customers. Deliver in coil, hard paper core inside, with paper interleaved. Eye to wall and eye to sky are both available.

FAQ

Q1: Are you trading company or manufacturer?

A1: We are factory.

Q2: How is the delivery time?

A2: Usually it is 5-10 days if the cargo are in stock. Or it is 15-20 days if the cargo are not in stock, it is according to total quantity.

Q3: Do you provide samples? Is it free or extra?

A3: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q4: May I customize the products?
A4: Of course you can. We will not begin manufacturing until we get full information about your requirement.

Q5: What are your trade terms?
A5: EXW, FOB, CFR, CIF will be accepted.