1350 Aluminum Strip For Transformer Winding

You are here:

Home
1350 Aluminum Strip For Transformer…

Product Name: Aluminum Strip Foil

Model: 1350-O

Temper: Soft

1350 Aluminum Strip For Transformer Winding Specification

Technical Specifications (1350 Aluminum Strip For Transformer Winding)
Product Range	Aluminum Strip Foil 1350 O Thickness 0.10 – 3.00 mm Width 10 – 1500 mm t<0.10mm and t>3.00mm on special request
Thickness Core Tube	= minimun 15 mm = maximun 20 mm
Edge Deburring Range	Thickness ≤0.20 mm; Burr≤0.03mm Thickness >0.20mm; Burr≤0.05mm
Staggered floor	Thickness ≤0.20 mm; Staggered floor≤0.5mm Thickness >0.20mm; Staggered floor≤2mm
Turriform	Thickness ≤0.20 mm; Turriform≤4mm Thickness >0.20mm; Turriform≤5mm
Protection	Possibility for paper-interleaving and paper core Thickness 0.20 – 2.50 mm Width 50– 1600 mm
Paper core Internal Diameter	Ø 150mm, Ø300mm, Ø400mm, Ø500mm paper core, special internal diameter core and without paper core on special request
Surface Finish	The strip has a smooth surface, free from scratches and impurities
Electrical Conductivity	Transformer windings made of 1350 O in annealed condition is guaranteed to be better than 62 % ACS

Chemical Composition:

1350 aluminum strip chemical composition(%)
Element	Si	Fe	Cu	Mg	Mn	V+Ti	Zn	Al
Standard Value	0.10	0.39	0.05	—	0.01	0.02	0.05	Min. 99.50

Mechanical Property:

U.T.S: 60-95N/mm2	Enlongation:＞25%
Density in 20℃: 2.703kg/dm3	Max.resistance in 20℃: ≤0.02825Ωmm2/m

1350 Aluminum Strip Application

1350 aluminum strip is widely used in transformers and reactors filters and mutual inductors. It has good forming property, high corrosion resistance, good weldability and conductivity.

1350 Aluminum Strip Packaging&Shipment

Standard export wooden pallet or wooden case. Also we can meet special requirements from our customers. Deliver in coil, hard paper core inside, with paper interleaved. Eye to wall and eye to sky are both available.

More Information

Appearance Standard

Soft surface, no grease, smooth and without feeling scratch.
Tolerances of side burr, thickness and width should less than that in the standard.

FAQ

Q1: Are you trading company or manufacturer?

A1: We are factory.

Q2: How is the delivery time?

A2: Usually it is 5-10 days if the cargo are in stock. Or it is 15-20 days if the cargo are not in stock, it is according to total quantity.

Q3: Do you provide samples? Is it free or extra?

A3: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q4: May I customize the products?
A4: Of course you can. We will not begin manufacturing until we get full information about your requirement.

Q5: What are your trade terms?
A5: EXW, FOB, CFR, CIF will be accepted.